Roof Guardrail Systems are OSHA Compliant

We supply non-penetrating Roof Guardrail Systems for industrial and commercial rooftops. Our fall protection guardrail systems are permanent, long-term and easy to install. These systems can be used for partial or entire perimeter guarding.

Ready to Install Roof Guardrail Kits

We ship complete systems that are ready to install and can be used immediately. These fall protection guardrail systems do not require any job site design, fabrication and welding.

Made In USA

100% of the fall protection guardrail system including sub-assemblies are Made in USA. Mill and foundry certificates are available upon request. Freestanding cast Iron Bases are 90% - 95% recycled content. Raw tubing used for 1-Piece Rail Sections is 70% recycled content.

Non-Penetrating Freestanding Base

This OSHA compliant Roof Guardrail System with 1-Piece Rail Sections is fast and easy to install by plant site personnel. Simply place the Freestanding Bases, insert Rail Sections and lock to bases using special Locking Pins.

Non-Penetrating Standing Seam Clamp

This Roof Guardrail System use non-penetrating mounting plates that clamps to standing seams without any drilling or penetrations. Standing Seam Clamps are available in three seam widths; 16”, 18” and 24”.

Integrated Roof Guardrail Options

Integrated options for our Roof Guardrail Systems are Toeboards, Self-Closing Safety Gates and Ladder Spanner Brackets. Fall protection guardrail finishes are hot dipped galvanized and safety yellow powder coat.

Rooftop Guardrail Systems

Freestanding 1-Piece Guardrail >>

This Roof guardrail System uses non-penetrating Freestanding Bases and 1-Piece Rail Sections. Installation is easy and fast without any roof penetrations. Fall protection guardrail can be used as a permanent, long-term fall solution.

Freestanding Base is cast iron with factory install EPDM rubber pad and for use on flat roofs with a 1/12 pitch or less. 1-Piece Rail Sections are secured the Freestanding Bases using provided Locking Pins. Integrated options are Toeboards, Safety Gates and Ladder Spanner Brackets. Request Quote  >>

Standing Seam Guardrail >>

This Roof Guardrail System uses non-penetrating Standing Seam Clamps and curved or vertical Precise Fit Rail Sections. Installer field trims the top and mid rails for an exact fit and connects system together using fittings.

Rail Sections attaches to standing seams without any drilling using special clamps. This fall protection guardrail is for roofs with a 2.5/12 or less pitch.

Standing Seam Clamps are available for seam widths of 16”, 18” and 24”. Integrated options are Toeboards and Safety Gates. Request Quote >>

Architectural Roof Guardrail >>

This Roof Guardrail System uses non-penetrating Freestanding Base and curved or vertical Precise Fit Rail Sections. Freestanding Base has a factory install EPDM pad and is used for flat surfaces with a 1/12 pitch or less.

Precise Fit uses standard off the shelf parts. Installer field trims the top and mid rails and connects system together using fittings. Completed fall protection guardrail is custom fit with a continuous, clean and professional appearance. Integrated options are Toeboards, Safety Gates and Ladder Spanner Brackets. Request Quote >>

Integrated Components
1-Piece Rail Sections >>
  • Use with: Freestanding Base
  • Rail Section lengths: 2' - 10' (up to 8’ for California)
  • Rail fabrication: 1-5/8" 16-gauge tube steel
  • Rail heights: 42" for top rail and 21" for mid rail
  • Finishes: safety yellow powder coat or galvanized
  • Locking Rail Section to Base: Locking Pin

Precise Fit Roof Guardrail »

  • Use with: Freestanding Base and Standing Seam Clamp
  • Rail section length: up to 10’ (8’ for California)
  • Stanchions: vertical or curved
  • Rail fabrication: schedule 40 pipe
  • Rail heights: 42" for top rail and 21" for mid rail
  • Finish: hot dipped galvanized
Freestanding Base »
  • Material: cast iron
  • Dimension and weight: 22” | 104 lbs.
  • Pad: factory installed 1/16” EPDM pad
  • Finishes: safety yellow and galvanized
  • Roof slope: 1/12 pitch or less
  • Origin: 100% Made in USA
Ladder Spanner Brackets for Fall Protection Guardrail
Spanner Brackets

Spanner Brackets attaches our Freestanding Roof Guardrail to fixed ladders, stairs and walls.

Self-Closing Safety Gate
Safety Gates

Safety Gates can be added to Rail Sections, fixed ladders and stairs.

Toeboards
Toeboards

Easy to install Toeboard Kits easy can be added to our Roof Guardrail at any time.

Accessories
Roof Hatch Guard Rail
Roof Hatch Guardrail

This Roof Guardrail System requires no penetrations and is fast to install. Each Hatch Guardrail includes grab bars, landing zone and self-closing safety gate. Simply place over the hatch and tighten the compression bolts against the curb.

Visual Warning Line
Warning Line

Warning Line uses cast iron Freestanding Bases and can be used as a permanent and long-term solution. Warning Line cable is galvanized, and pennants (flags) are aluminum with a safety yellow powder coat finish.

 

Skylight Screen

Skylight Screen uses compression attachment without any penetrations into the roof, curb and skylight. Compression fit Skylight Screens are easy to install and does not require drilling, cutting or special tools.

Skylight Guard
Skylight Guardrail

Skylight Roof Guardrail is freestanding does not penetrate the roof, curb and skylight. Simply place the guard over the skylight and tighten the compression bolts against the curb.

Crossover Ladder and Stairs
Crossover Stairs

Crossover Stairs allow your workers, contractors and visitors to safely walk over pipes, dusts, conduit, expansion joints and parapets. Crossover Stairs are a modular design that simply bolt together with a few hand tools.

Roof Access Guard
Roof Access

Roof Access Guardrail is freestanding and non-penetrating. This system attaches to OSHA compliant existing roof access ladders using Spanner Brackets.

Roof Guardrail Creates Safer Work Environments

Roof Guardrail Systems are barriers used to prevent workers from falling to a lower level. They also eliminate trip hazards created by Fall Restraint and Fall Arrest anchors and connecting devises when workers are cleaning drains, services HVAC and maintaining roofs. Also, using fall protection guardrail removes the need to train for rescuing a worker that has gone over a roof edge when using Fall Arrest Systems.

Roof Guardrail Uses
  • Permanent, long term fall protection applications
  • Partial and entire rooftop perimeter guarding
  • Rooftop walkways and openings
  • Fixed roof access ladders

 

  • Cleaning drains, repair and maintenance of roofs
  • Servicing HVAC, cooling fans and vents
  • Environments requiring heavy duty galvanized finish
Freedom of Movement

Our OSHA compliant Roof Guardrail Systems does not require the use of Fall Restraint and Fall Arrest after installation. Fall protection guardrail systems provides workers freedom of movement within the guardrail perimeter without the use of anchors, connecting devices and harnesses.

OSHA Compliance

Safety Rails Systems is a supplier of OSHA Compliant Roof Guardrail Systems. These fall protection guardrail systems meet the OSHA Requirements of 1910 (General Industry) and 1926 (Construction).

Contact Us for a Quote or Technical Information >>

Our core value is helping people work safer on rooftop environments by using OSHA compliant Roof Guardrail Systems. We will provide a fall protection guardrail system that is specific for your rooftop fall hazards. Contact us today about your fall protection project, many of our products are in stock and ready to ship.