Roof Safety Railing Systems

Safety Railing for All Roof Applications

We can provide an OSHA Compliant Safety Railing System for all roof edge guarding applications. Our roof safety systems are permanent, long-term and easy to install. These systems can be used for partial or entire perimeter guarding.

We ship a complete, ready to install Safety Railing System that can be used immediately. These roof safety systems do not require any job site design, fabrication, cutting and welding. Rail Sections are easily attached to Receiver Tubes using special Locking Pins or set screws.

Integrated options for our Safety Railing Systems are Toe Boards, Self-Closing Safety Gates and Ladder Spanner Brackets. Standard finishes are hot dipped galvanized and safety yellow powder coat. We also offer 58 custom powder coat finishes that meet most architectural needs.

Non-Penetrating Freestanding Base

Our Freestanding Safety Railing System is fast and easy to install by plant site personnel. Simply place the Freestanding Bases, insert Rail Sections and lock to bases using special Locking Pins.

Non-Penetrating Roof Seam & Parapet Clamp

Our Standing Seam and Parapet Clamps are also fast and easy to install by plant site personnel. These systems use special clamps that mechanically attach without any drilling or penetrations.

Attached Wall Mount

This roof safety system is an alternate to our non-penetrating base and clamp styles. Wall Mounts attach to the substrate using mechanical fasteners.

Safety Railing Protects Workers

Safety Railing Protects Your Workers

Freestanding Safety Railing

Freestanding Safety Railing

This roof safety system uses 104lb cast iron bases with integrated rubber pad. They are designed for use on flat roofs with a 1/12 pitch or less. Installation is fast without any penetrations and can be used as a permanent, long-term fall protection solution.

Each Freestanding Base has four Receiver Tubes for use with Modular Rail Sections (one piece), Architectural Rail Sections, Ladder Spanner Bracket Posts and Safety Gates. Click here learn more

Standing Seam Safety Railing

Standing Seam Safety Railing

This roof safety system uses Standing Seam Clamps that are comprised of mounting plates with special non-penetrating fasteners. These clamps are easy to install with a few common hand tools. This system can be customized so that Rail Sections are vertical on sloped roofs.

Each Standing Seam Clamp has two Receiver Tubes for use with Modular Rail Sections (one piece), Architectural Rail Sections and Safety Gates.

Parapet Clamp Safety Railing

Parapet Clamp Safety Railing

This roof safety system uses non-penetrating Parapet Clamps with integrated rubber bumpers. Parapet Clamps are fast to install, simply place on parapet and tighten using a 1.25” socket wrench.

Each Parapet Clamp has two Receiver Tubes for use with Modular Rail Sections (one piece), Pipe and Fitting Rail Sections and Safety Gates.

Wall Attached Safety Railing
Wall Mount Safety Railing

This roof safety system permanently attaches to building walls and parapets using mounting plates. Each mounting plate requires four anchors that are engineered and purchased by the installer.

Wall Mounts have either one or two Receiver Tubes and can be use with Modular Rail (1-piece), Pipe and Fitting Rail and Safety Gates.

Modular Rail
Modular Rail Specifications

Our 1-piece Modular Rail Sections can be used with Freestanding Bases, Standing Seam Clamps, Parapet Clamps and Wall Mounted Safety Railing Systems.

  • Rail Section Lengths: 2' - 10'
  • Rail Fabrication: 1-5/8" 16-Gauge Tube Steel
  • Rail Heights: 42" for Top Rail and 21" for Mid Rail
  • Finishes: Galvanized, Safety Yellow & Custom
Pipe & Clamp Rail
Pipe & Fitting Rail Specifications

Our Pipe and Fitting Rail Sections can be used with Freestanding Bases, Standing Seam Clamps, Parapet Clamps and Wall Mounted Safety Railing Systems.

  • Rail Section Design: Pipe & Fitting
  • Rail Section Lengths: 21’ (up to)
  • Rail Fabrication: Schedule 40 Pipe
  • Rail Heights: 42" for Top Rail and 21" for Mid Rail
  • Finishes: Galvanized, Safety Yellow & Custom

Integrated Options & Systems

 
Safety Gate
Safety Gates

Our Safety Gates can be added to any of our Safety Railing Systems, and most existing roof ladders and stairs.

Spanner Brackets
Ladder Spanner Brackets

Spanner Bracket Kits attach our Freestanding Safety Railing to roof ladders, stairs and walls.

Toe Boards
Toe Boards

Easy to install Toe Board Kits easy can be added to our Rails Sections at any time. We also offer factory attached Toe Boards.

Roof Hatch Safety Railing
Roof Hatch Safety Railing

This roof safety system requires no roof or hatch penetrations, and fast to install. Each Roof Hatch Guard includes grab bars, landing zone and self-closing safety gate. Click here to learn more

Skylight Safety Railing
Skylight Safety Railing

This roof safety system is freestanding and non-penetrating. Simply place the Skylight Guard over the skylight and tighten the compression bolt against the curb.

Warning Line System
Visual Warning Line

This roof safety system uses our Freestanding Bases, and can be used as a permanent and long-term solution.